Seal industrial flooring securely and colourfully


A technically faultless and properly functioning floor is an important prerequisite for trouble-free, safe and economic work procedures in industry and trade as well as in public areas.

StoCretec floor sealings and coatings stand for technical and economic solutions: whether it is in the restoration of damaged floor areas, adaptation to changed use or in completely new buildings. In the case of mechanical stress from impact, abrasion, point stresses or surface stresses. With chemical stress from oil, fuel, cleaning agents, salts, acids and solutions.

StoCretec coating systems are characterised by their high level of product benefit, combined with simple, economic application and a high degree of environmental compatibility. Due to their solvent- and plasticiser-free product components, water-based systems in particular offer a pleasant environment during their application and later use.

Quick, easy and colourful: Protective coating with StoPox WE Mattsiegel.
The quick and easy way to seal low stress floor areas or overcoat old EP coatings, which are no longer in prime condition, or to freshen up a worn-out appearance and restore functionality.

Many years of experience pay off. For over 20 years StoCretec has been developing and selling water-based floor sealings based on epoxy. Today it is possible to apply diffusion-open sealings, such as StoPox WE Mattsiegel, not only manually but also by machine with airless equipment. This leads to short and economic application times and creates a homogeneous matt appearance. As with all water-based StoCretec floor coatings, StoPox WE Mattsiegel is also of course solvent-free and plasticiser resistant.

Pretty matt

The gloss level of StoPox WE Mattsiegel is only 10 gloss units. A low value, which underlines the matt sealing effect. The gloss level is measured in accordance with DIN 67530 at a measurement angle of 60°. Based on experience, matt surfaces appear more homogeneous than gloss surfaces, and they can contribute to masking roughness in substrates."

Areas of application

The matt StoPox WE Mattsiegel is primarily suitable for the following applications:

  • As a coloured matt effect on self levelling coatings
  • As a matt sealing effect for (old) EP coatings
  • As coloured sealing with matt appearance on mineral substrates

StoPox WE Mattsiegel serves primarily as a coloured coating for industrial flooring, but due to its excellent technical properties, it can also be used for sealing in areas, where there is traffic.

Product information


Click here to find out more about StoPox WE Mattsiegal.

Contact us

Sto SEA Contact Centre 

159 Sin Ming Road

Tel: +65 6453 3080
Fax: +65 6453 3543